Jetzt anrufen

Person auswählen

overtec GmbH – Zentrale

Salzburger Straße 101‭, 4800 Attnang-Puchheim

overtec Brüstung einbetoniert

on brick walls, concrete walls, ceiling formwork, sand-lime bricks or concrete shells

overtec_logo-weiss

overtec Brüstung 4 einbetoniert

is a single-shell parapet with a permanent fall protection function, which is concreted into the concrete ceiling.

Overtec, as a concrete-encased variant, is placed on the masonry or ceiling formwork and also serves as ceiling edge formwork. This means that several steps are combined into just a few. As a rule, the elements have to be moved using a crane with two people.

1515250_diploma_certificate_certified_licence_patent_icon

Patented

approbation_approval_approved stamp_authorization_certified_icon

Authorized

recycle_sign_icon

EPD Certified

Here you can see how the minimal overtec parapet is assembled

including ceiling grid

The overtec parapet 4 set in concrete is the original on the market and is produced in Austria. The OneBit screw was developed by overtec to suit the system. This is optimized and approved for the panel material according to EN13986:2004+A1:2015. Likewise, only one bit is required for construction, which is on top of each screw box. The elements are connected with an alignment system that can accommodate panel expansion. All steel components are hot-dip galvanized on all sides and rust-proof. The life cycle of an overtec is also recorded in the environmental declaration EPD and can be issued for your project. Our languageless installation instructions and videos support quick, safe and professional installation, without any prior knowledge

substrates

Everything is easy to begin with: the first steps when moving to, for example: in-situ concrete formwork

Betonwand BW

60sec Video

Kalksandstein KS

60sec Video

Ziegelmauer ZM

60sec Video

Deckenschalung DS

60sec Video

See here how overtec integrates into your building and identify important interfaces at an early stage.

Integrating balcony parapets into a building can be a challenge. Many trades are involved and good coordination is necessary. Our configurator helps to identify the interfaces and understand how they can be seamlessly integrated into the building. Whether during planning or completion, we accompany you every step of the way and offer solutions for your individual needs. With our configurator you are one step closer to your project. This avoids problems when integrating the balustrade on the balcony and ensures that the construction work runs smoothly.

Sehen Sie hier ein aufschlussreiches Projektbeispiel

Balustrade on the balcony

USING SCREW CONNECTION, INCLUDING CEILING GRATE BL-BM

The parapet is placed on the concrete wall with a thickness of 4cm. It is important to ensure that the support is reasonably flat and that the reinforcing bars leave enough space for the parapet element. After being placed on the concrete wall, the element is connected to the subsurface using a small angle component (1x per panel).

Here you can see how the largest overtec balcony balustrade is installed

Concrete ceiling

The balustrade on the balcony can either be placed on the masonry and connected to it or supported on the outside. To ensure that the balustrades on the balcony are actually aligned parallel to each other, an alignment cord and green alignment dowels help. Each element is set up individually and installed towards the middle. A hand-held circular saw with a carbide saw blade is recommended for cutting the parapet. Care should be taken to ensure that the cover plate is attached immediately after installation. As soon as the ceiling is concrete, further balcony construction can take place. The professional installation and alignment of the balustrades on the balcony ensures an increased level of safety and stability.

OUR PRODUCTS

Our detail library for minimal planning

Architects and planners looking for new options for balcony design can consider the parapet detail. This slim detail allows all important aspects to be taken into account, from sealing and insulation to sheet metal and facade, to create a perfectly planned balcony. The best part is that it offers an intuitive drag-and-drop feature that makes it easy to integrate into the plan and customize as you wish. Ask us about different file formats or download the information you need directly from Ausschreibe.de. The parapet detail is undoubtedly an ideal solution for the modern architect or planner. You can also find tender texts on Ausstellen.de

overtec Brüstung 4 einbetoniert

Our detail library for minimal planning

OUR PRODUCTS

Architects and planners looking for new options for balcony design can consider the parapet detail. This slim detail allows all important aspects to be taken into account, from sealing and insulation to sheet metal and facade, to create a perfectly planned balcony. The best part is that it offers an intuitive drag-and-drop feature that makes it easy to integrate into the plan and customize as you wish. Ask us about different file formats or download the information you need directly from Ausschreibe.de. The parapet detail is undoubtedly an ideal solution for the modern architect or planner. You can also find tender texts on Ausstellen.de

Sie wollen mehr wissen?

Vereinbaren Sie jetzt ein kostenloses Beratungsgespräch.

Kontakt

Kontaktieren Sie uns

Zögern Sie nicht und erleben auch Sie schon jetzt die Zukunft mit den handgriffminimalsten und den flächenmaximalsten Produkten von Overtec.
Overtec Deutschland GmbH

Ohmstraße 3
80802 München
Deutschland

Telefonnummer

+49/ 8771 8684900

E-Mail-Adresse

anfrage@overtec.com