overtec Shaft

is a prefabricated element that routes installations and pipe penetrations above the roof. Discover the advantages of an overtec Shaft in just a few seconds.

overtec Prefabricated Shaft

consists of a vertical, 40mm narrow wood-hybrid panel that is screwed to a concrete ceiling via two metal brackets at the base.

 

As a retrospectively screwed variant, overtec offers the key advantage that the entire parapet wall — or individual parapet segments — can be flexibly installed at a later point in time. This leaves room for material delivery into the building interior. After the interior fit-out is complete, the parapet gaps can be closed.

recycle_sign_icon
EPD Certified
approbation_approval_approved stamp_authorization_certified_icon
Approved
Schacht Fertigschacht

Fire Protection Class A2 or B1

Depending on building height and building class, different fire protection requirements apply to shaft elements. A distinction is generally made between the fire resistance class (e.g. EI90) and the fire protection class (e.g. A2 or B1). While the overtec panel material is available in A2 and B1, the EI90 fire resistance class is achieved through an on-site build-up.

Fire Resistance Assembly for EI90

To achieve EI90 fire resistance, 5 cm of mineral wool is applied on-site. This extends well above the roof deck insulation. If there are cavities within the shaft element, it must be rear-ventilated to reduce condensation. Alternatively, the entire shaft can be filled with mineral wool to eliminate the need for rear ventilation.

Schacht Fertigschacht
QR-Code, der zu Overtec's YouTube-Kanal führt.

Structural Support for Oversized Elements

Shaft elements on flat roofs can present a large surface area exposed to wind. The structure must withstand occurring loads, regardless of future installations. Structurally, the elements are divided into panel segments that are connected to each other — for example, using perforated plate connections and screws with the overtec oneBit screw approved for the material.

Together we are overtec

If you contact overtec, it will probably be with one of us.

 

The overtec team is divided into three locations: Production and an office in Attnang-Puchheim, another office in Vienna and a sales location in North Rhine-Westphalia. For our customers, we rely on personal proximity in sales, while our back office is well connected digitally across our locations and handles your project professionally. We look forward to your inquiry and hope that we can exceed your expectations.